Our ranges

Vinyl, herringbone & laminate

Three ranges cover almost every job we do. Here is what each one actually is, the rooms it suits, and the things worth knowing before you choose. Still stuck? Send us a photo of the room and we will tell you straight.

Range 1

Vinyl & SPC

The hard-wearing choice for wet and busy rooms

Vinyl is a tough synthetic floor with a printed wood or stone design sealed under a clear top layer. It comes as planks or tiles that either click together or glue down. SPC is the rigid version — a stone-plastic core that holds its shape, so it suits rooms that get splashed, sunny or walked on all day.

Cross-section diagram of a rigid vinyl plank showing the wear layer, printed vinyl, SPC core and underlay, with water sitting on top

How a rigid vinyl plank is built: a clear wear layer on top, the design underneath, then a solid SPC core and a soft underlay.

Why people pick it

  • Kitchens, bathrooms and utilitiesWater sits on the surface instead of soaking in, so spills and pet accidents wipe straight up.
  • Quieter and warmer underfootSofter than laminate or tile, and the underlay takes the ring out of hard footsteps.
  • Often goes over your old floorClick SPC can usually be laid straight over a sound, flat existing floor, so there is less to rip up.
  • A doddle to keep cleanSweep it, damp mop it, done. No polishing or special treatments.
  • Built for wearRental flats, shops, offices and cafés — rooms where the floor never gets a day off.

Best rooms for it

Kitchens · Bathrooms · Utility rooms · Hallways · Rental units · Shops, offices and cafés

Good to know

  • The floor underneath still matters — vinyl follows whatever is below it, so a bumpy or damp base needs putting right first.
  • The clear wear layer is what you are paying for. A thicker one lasts longer in busy rooms, and we will match it to yours.
  • The planks shrug off water, but the edges and doorways still need wiping dry and the right trim.
  • Send us a photo of the room and we will tell you whether click or glue-down suits it better.

Range 2

Herringbone

The classic that lifts a whole room

Herringbone is real wood boards laid in a broken zigzag. It is the floor people stop and look at, and the job we are best known for. Every board is cut and butted by hand, so the lines run true and the edges stay crisp. Chevron is its smarter cousin — the same zigzag, but the boards are cut at an angle so they meet in a clean V.

Top-down diagram comparing a herringbone board layout with a chevron layout

The two patterns people ask us for: herringbone, where square-ended boards butt against each other, and chevron, where they are cut to meet in a point.

Why people pick it

  • Real wood, not a picture of itGenuine oak boards with a real grain, and the pattern shows that grain off.
  • Adds character and valueIt reads as a period feature and lifts how a whole room presents.
  • Your pattern, your sizeBoard width and length, herringbone or chevron — chosen to suit the room, not the other way round.
  • Finish to suitNatural, smoked or whitened oak, in an oil or a hard-wearing lacquer.
  • Marked out properlyThe pattern is set out from the middle of the room so the lines never drift into a corner.

Best rooms for it

Hallways · Living rooms · Open-plan dining spaces · Bedrooms · Shops and cafés

Good to know

  • Boards rest in your room before laying, so the wood settles at your home's warmth and dampness.
  • A dry, flat base is essential — we check moisture and flatness before a single board goes down.
  • Hand-laid patterns take longer than a click floor. We will tell you honestly how many days to expect.
  • Come to the showroom and lay boards on your own floor before you commit to a tone.

Range 3

Laminate

Smart wood looks at a sensible price

Laminate is a hard-wearing board with a photographic wood design sealed under a clear wear layer. The planks click together as a floating floor laid over an underlay, so fitting is quick and the price stays sensible. It is the range we fit most often in family homes and rental property.

Cross-section diagram of a laminate plank showing the wear layer, wood-effect print, core board and underlay

How a laminate plank is built: a clear wear layer, the wood-effect print, a thick core board, then an underlay beneath.

Why people pick it

  • Tough on daily lifeThe wear layer takes chairs, heels and claws better than real wood in busy rooms.
  • Quick to layA few rooms in a day, so the disruption is short and you are back on the floor that evening.
  • Wood looks without the wood priceA wide choice of oak tones, plank widths and edge bevels.
  • Good for rentals and shopsA hard-wearing floor that holds up without wrecking the budget.
  • Underfloor heating adviceWe will tell you which laminate and which underlay suit a heated floor.

Best rooms for it

Living rooms · Bedrooms · Hallways · Offices · Rental property · Shops

Good to know

  • Standing water is its weak spot — wipe spills up promptly. For very wet rooms we would rather fit vinyl.
  • It can sound hard underfoot. A decent underlay makes it quieter and softer; the cheap stuff does not.
  • The subfloor has to be dry and flat, or the clicks can creak and open over time.
  • A deep scratch is patched or a plank swapped rather than sanded out, unlike real wood.

Laminate or vinyl?

The short answer

It is the question we get most. Both look like wood, both click together, and both are hard-wearing — the difference is water and warmth.

Spills and damp

Laminate

Wipe them up quickly. Water left standing can creep into the clicks and swell the edges.

Vinyl & SPC

Water sits on the surface, which is why we push it for kitchens and bathrooms.

Underfoot

Laminate

Hard and firm — a good underlay takes the click out of it.

Vinyl & SPC

Softer, warmer and noticeably quieter.

The look

Laminate

Wood effects, from pale oak to grey plank.

Vinyl & SPC

Wood and stone effects, with planks that feel closer to the real thing.

Going over your old floor

Laminate

Needs a dry, flat base plus underlay, so the old floor usually comes up.

Vinyl & SPC

Click SPC often goes straight over a sound, flat existing floor.

Sunny rooms

Laminate

Fine, with the right expansion gaps left at the edges.

Vinyl & SPC

The rigid SPC core stays flatter as the room heats up and cools down.

Want the showpiece instead? Herringbone is the one people remember.

See it in a room

Floors we have actually laid

Every photo below is a Flourish job, not a catalogue picture.

Light oak herringbone floor in an open-plan dining space
Herringbone
Grey-brown herringbone floor in an open-plan living space
Herringbone
Beige chevron carpet meeting herringbone oak flooring at a doorway
Herringbone meeting carpet
Warm wood-effect laminate laid through a retail shop interior
Laminate in a shop

We do not keep vinyl on display photos — come to the showroom and put the sample boards on your own floor.

Beckton Retail Park, Unit 4A1, Alpine Way, London E6 6LA (inside Luxe Furnishing)

Next step

Send us the room, we'll pick the range.

Tell us which rooms and roughly how big, and we will reply on WhatsApp with what would suit and what it would cost.

Need the measurements first? Our how to measure guide walks you through every room, step by step.